# AmiTCP_NG 4.1.8

> Open, modernised TCP/IP stack for 68k AmigaOS — a GPL fork of AmiTCP/IP 3.0b2 providing a Roadshow-compatible bsdsocket.library ABI (interoperability only; no Roadshow code).

- Page: https://hangar.freemem.space/p/1158799
- Source: GitHub (accepted repository)
- Author: MW0MWZ
- Date: 2026-10-08
- Size: 324 KB
- Website: https://github.com/MW0MWZ/AmiTCP_NG
- Install: open Hangar on the Amiga, search for it and press Install.

## Description

Open, modernised TCP/IP stack for 68k AmigaOS — a GPL fork of AmiTCP/IP 3.0b2 providing a Roadshow-compatible bsdsocket.library ABI (interoperability only; no Roadshow code).

AmiTCP_NG 4.1.8

**AmiTCP_NG 4.1.8** — an open, unlimited `bsdsocket.library` TCP/IP stack for 68k AmigaOS.

A drop-in replacement for Roadshow: same API, same configuration files, same command set, with no time limit and no registration. The ABI is unchanged (**4.1**), so this is a drop-in upgrade from any 4.1.x and Roadshow's own configuration tools keep working.

### What's new since 4.1.7

- **SLIP and PPP can be set up from the interface file.** `destination=` names the far end; `pointopoint=yes` forces a point-to-point link for a driver that does not report one. `255.255.255.255` is correct on such a link and now works.

- **The machine stays usable during a transfer on a 68000.** A 7 MHz 68000 is saturated by a busy connection, and the stack ran above applications, so the mouse and windows stalled until the transfer finished. On a 68000 it now runs below them; 68020 and up are unchanged. `NETTASKPRI` in `AmiTCP.config` overrides that on any processor, as does `RoadshowControl SET task.priority`, and a change takes effect at once.

- **Calling the stack no longer demotes a high-priority program.** Entering the library set the caller to the network task's priority — which *lowered* anything already running above it. It now only ever raises.

- **A hung network driver no longer takes the stack down with it.** `BeginIO()` runs on the calling task, so a SANA-II driver that never returned used to trap the stack itself, and only a reboot cleared it. Device commands now go through a separate task: if one is swallowed, the stack waits 15 seconds, logs the driver and command, and carries on. Control commands only — the per-packet path is untouched and throughput is unchanged.

- **The configuration checker says what is wrong.** `CheckAmiTCPNGConfig` now names the setting behind a default route that cannot be installed, instead of leaving you with `errno 51` at boot.

### Known

- **PiStorm + `wifipi.device`:** taking the interface offline and back online may need the Wi-Fi association re-run first. The failure is reported by `WirelessManager`, not by the stack. Other SANA-II drivers are unaffected.

- The driver protection above covers device commands. A driver that hangs while sending or receiving a packet can still stall the stack; that path is deliberately left alone because guarding it would cost speed on every frame.

- IP multicast *receive* is not implemented.

### Downloads — one archive, every Amiga

`AmiTCP_NG-v4.1.8.lha` (hard drive) or `AmiTCP_NG-v4.1.8.adf` (floppy). That is the whole list.

### Installing

Double-click `Install-AmiTCP_NG`. It installs over an existing Roadshow or AmiTCP_NG setup and keeps your configuration; Uninstall puts back what it replaced.

### Buy me a coffee ☕
This is a hobby project, done for the love of the Amiga — not to make money, and it will always be free. But if it's useful to you and you fancy buying me a coffee, that's very kind: https://paypal.me/AndyTaylorTweet — entirely optional, and thank you either way.
