# AmiNetXDuo-1.0.0-rc7 1.0.0-rc7

> Open-source IPv4+IPv6 TCP/IP stack

- Page: https://hangar.freemem.space/p/1161026
- Source: Aminet
- Author: Tinic Uro
- Category: comm/net
- For: m68k-amigaos >= 2.0.4
- Requires: 68000+, 1 MB RAM (2 MB to install), a SANA-II network card
- Date: 2026-11-21
- Size: 5940 KB
- Website: https://github.com/tinic/AmiNetXDuo
- Install: open Hangar on the Amiga, search for it and press Install.

## Description

Short:        Open-source IPv4+IPv6 TCP/IP stack
Author:       Tinic Uro
Uploader:
Type:         comm/net
Version:      1.0.0-rc7
Replaces:     comm/net/AmiNetXDuo-1.0.0-rc3.lha
Requires:     68000+, 1 MB RAM (2 MB to install), a SANA-II network card
Architecture: m68k-amigaos >= 2.0.4
Distribution: Aminet
URL:          https://github.com/tinic/AmiNetXDuo

AmiNetXDuo is a free, open-source TCP/IP stack for the classic Amiga.  It
provides the bsdsocket.library that Amiga network programs already use, and
reaches the network through your card's ordinary SANA-II driver, so
programs written for bsdsocket.library keep working; ssh, NFS mounts and
ixemul programs included.

It speaks IPv4 and IPv6.  On a network with an IPv6 router the Amiga gets an
address by itself, with nothing to configure.  Underneath is Eclipse ThreadX
NetX Duo, an embedded industrial TCP/IP stack, ported to Exec.  Its interface
files use Roadshow's format.

It is MIT licensed.  This is a release candidate for 1.0.0: if nothing
serious turns up, 1.0.0 follows with the same code.


New since 1.0.0-rc3
-------------------

  * AmiNetXDuo updates itself.  The installer asks whether to check for
    updates at boot; once a day the Amiga then looks for a newer version
    and offers Install, Skip this version or Later.  Updates are signed
    and checked before anything changes, a power cut during an update is
    safe, and an update after which the network does not come up is taken
    back.  NetPrefs has an Updates page with a Check now button.
    An installation of rc3 or older needs this installer run once.
  * Point-to-point interfaces, for VPN drivers such as the OpenVPN
    client's vpn.device, PPP (ppp.device) and SLIP, with IPv4 and IPv6
    routes through the link.  NetPrefs edits them.
  * Wi-Fi started at boot comes up every time, and a card that is not yet
    online when the stack starts comes back by itself once it is.
  * Audio players and other programs keep running without dropouts during
    a long download.
  * Uploads through NE2000-compatible cards, the 3Com 3C589 and the A2065
    are faster on a 68020 to 68060.
  * sntp takes the time zone from ENV:TZONE, daylight saving included.
  * SyncReboot restarts the Amiga after writing every disk buffer.
  * CreateAmiNetXDuoStatusReport shows what a stalled program waits on.

The full list is in CHANGELOG.md on GitHub.


Features
--------

  - bsdsocket.library (AmiTCP/Roadshow API), usergroup.library
  - IPv6: SLAAC, DHCPv6, neighbour discovery, duplicate address detection
  - DHCP, DNS, .local names (mDNS), IPv4 multicast, a packet filter
  - tls.library for https: and other encrypted connections, CA roots
    included
  - ssh and scp clients
  - httpd: your volumes over HTTP and WebDAV, a Shell in the browser, and
    the Amiga's screen in the browser with mouse, keyboard and clipboard
  - For the Workbench: NetPrefs (edits interface definitions, keeps your
    comments), NetMeter, NetSwitch and NetWireless
  - ping, traceroute, nslookup, netstat, ShowNetStatus, fetch, telnet,
    tftp, sntp, iperf, NetCapture (writes .pcap files for Wireshark),
    ShowTasks, WatchTasks, CheckNetConfig and CheckNetDevice when
    something does not work
  - Updates itself from aminetxduo.tinic.info, if you let it
  - Three stacks to choose from at install time: Full, Minimal without
    IPv6 and encryption, and Micro for small machines

Drivers included:

  anxnet.device     A2065, Ariadne, Ariadne II, AmigaNet, LAN Rover,
                    X-Surf, X-Surf 100, X-Surf 500, NE2000-compatible and
                    D-Link DL10019 PC Cards, 3Com 3C589
  anxgenet.device   Raspberry Pi 4/CM4 Ethernet, PiStorm32 with Emu68
  anxwifipi.device  Raspberry Pi 3A+/4/CM4 Wi-Fi, PiStorm with Emu68
                    (experimental)
  Xircom PCMCIA driver and pccard.library

Any other SANA-II driver works as well.


How fast
--------

Measured with AmiSpeedTest against a server on the local network,
download / upload:

  A1200 PiStorm32 CM4, GENET, anxgenet.device             835 / 747  Mbit/s
  A3000 68060/50, X-Surf 100, anxnet.device              20.5 / 14.1 Mbit/s
  A500 PiStorm Pi 3A+, Wi-Fi 5 GHz, anxwifipi.device     60.9 / 83.8 Mbit/s


Installing
----------

Unpack the archive anywhere and double-click Install-AmiNetXDuo.  The
installer finds your card's driver, writes the interface definition, and
puts the stack in the system directories or in a drawer of its own.  The
ReadMe in the archive lists every file it installs; Docs/AmiNetXDuo.guide is
the manual.


Licence
-------

MIT.  A few parts keep their own licences (ThreadX and NetX Duo MIT,
NetBSD's NE2000 core BSD, Dropbear's ssh, Mozilla's CA roots, the Wi-Fi
driver MPL 2.0 and codesets.library LGPL); the archive's documentation lists
them.


Reports from real hardware are the most useful thing you can send: the
machine, the card, the Kickstart, and what happened.  Source and issues:

  https://github.com/tinic/AmiNetXDuo
