mv_mr10 1.0

Short:        Must Read Door for DayDream BBS
Author:       teorist@ns.gov.yu (Teorist / Mad Virgin)
Uploader:     Teorist (teorist pancevo com)
Type:         comm/bbs
Version:      1.0
Architecture: m68k-amigaos

Description:

                  Mad Virgin presents a new DayDream door

                                Must Read 1.0
                               ---------------

Instalation:
------------
Just unpack archive and type 'INSTALL' and then add MustRead to your
External Commands.


Or manualy, create Doors:MV/MustRead directory and copy all files to it
(MV_MustRead needs mentioned directory for internal savings!!!)
Then add following line to your DayDream:Data/LogOnDoors.DAT file:
Doors:MV/MustRead/MustRead %N


(or, you may add to your DayDream:Display/YOUR_MODES/Welcome.GFX|TXT files
 following line:

ÿDDoors:MV/MustRead/MustRead %N |USERS|
^
|__---> ASCII code 255 is default DayDream char for commands, see
        CONTROLCHAR settings in main section of your DayDream configuration.

If you put this in Welcome.XXX don't  forget |USERS| at the end of line.)



It is highly recomended :) to add following in your DayDream config
!EXTERNALCOMMANDS.DAT section :
+
DOOR_COMMAND.. MUSTREAD
DOOR_TYPE..... 1
DOOR_SECURITY. 255
DOOR_EXECUTE.. Doors:MV/MustRead/MustRead %N
DOOR_CONFS1... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
DOOR_CONFS2... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+

if you want to set events for users. Note, noone with access level under
255 would not be able to use this door in 'normal' mode, just in 
"USERS" mode (if you want to test, you may type "MUSTREAD USERS" when
you are logged in)


USAGE:
------

For users : 
           Nothing, they just will be forced press some (randomly 
           selected) key to proceed with loging in.
For SysOp :
           When you start this Door in SysOp mode (dd command "MustRead"
           if you configured as mentioned) you will be able to add new
           textfile.
           If you want to display different files for ASCII/ANSI
           users, you may create [basefilename].TXT and .GFX 
           versions, becouse depending on user's personal ANSI/ASCII
           settings, MV_MustRead will first try to open 
           your_entered_filename.GFX  or your_entered_filename.TXT and if
           fail will put "your_entered_filename" to user's screen.
           

           
           If you want to remove some event, you can do it in ASCII file
           created by MV_MustRead as "Doors:MV/MustRead/Events.DAT" but
           DO NOT DELETE LINE, but just type ------ in second field!!!!
           i.e.
           one line looks like this:
|00012|07555|DayDream:Announce/bla-bla-bla
           and you want not to show this anymore you should edit as following
|00012|-----|DayDream:Announce/bla-bla-bla
           in fact, just first dash is needed, but.. aeshtetic is important :>
           As you see, config have format:
 Event Nr | expire day | file to display 
           where expire day may have two special cases:
           |-----|   <- event is disabled
           |00000|   <- event will never expire
 
           If you want to execute command instead of displaying text
           you may use DayDream control codes (as for installing in
           LogOnDoors.DAT).
           
           Be carefull when instaling banners, becouse MV_MustRead will
           not strip control codes from files.


MISC:
-----

           If you are going to delete Doors:MV/MustRead/Events.DAT, 
           you MUST delete Doors:MV/MustRead/Users.DAT, or some
           users will not see new issues!

           If you want to skip or change ANSI [slowdown :) ] sequence,
           you may add file
           Doors:MV/MustRead/ANSI_ANIM
           and MV_MustRead will put it to screen instead built-in
           ansi-anim sequence.


AUTHOR:
-------
         Teorist^Mad Virgin
         email: teorist@ns.gov.yu
         URL  : www.bozic.co.yu/~teorist
         BBS  : EroS - +381/ 13- 353189 , 22 to 07 CET