SmpteCTRL 1.11 FREE VERSION

Short:        CLI/GUI SMPTE Ctrl program for Studio 16
Author:       kenny@bgnett.no <Kenneth "Kenny" Nilsen>
Uploader:     kenny bgnett no <Kenneth "Kenny" Nilsen>
Type:         mus/misc
Version:      1.11 FREE VERSION
Requires:     Studio 16 v3.x
Architecture: m68k-amigaos


mailto:kenny@bgnett.no

Copyright (C) 1998,1999 by Digital Surface/Kenneth "Kenny" Nilsen.
All rights reserved.

THIS SOFTWARE IS FREEWARE.

- What is SMPTECTRL (SMPTE Control) ?

	This program allow you to control the SMPTE sinks of Studio 16
	from the CLI command line or by a GUI.

	You can control sinks like the Internal source or the
	"SMPTE Output" sink source, the B&P sink and so on.

	You can PLAY, STOP, FastForward and Rewind the sink. You can
	even set a SMPTE code at any time. You can also select source
	or use default (current) sink source.

        The GUI contains four buttons for Play, Stop, FF, REW and an
        input gadget to set a new SMPTE time. It also contains a line
        which shows current SMPTE time and buttons for storing and
	recalling TC memory. The GUI will pop up on the Workbench
	screen or any other public screen.

- What does it require ?

        A SMPTE source which could be Studio 16 or the "SMPTE Output"
        stand-alone module. It require the Studio 16 v3.x in order
        to work. For gui it requires dfunc.library v38 (included).
	It requires OS 2.04 or better to work as well.

Examples of use (CLI examples):

	1> SMPTECTRL PLAY

	Will start play the current sink.

	1> SMPTECTRL PLAY SetSource "SMPTE Output"

	Will force the "SMPTE Output" module to start play if it's
	available

	1> SMPTECTRL STOP

	Will stop current sink source.

	1> SMPTECTRL SetSMPTE "00:01:02:12" SetSource "SMPTE Output"

	Will set the "SMPTE Output" source to time 00:01:02:12.

	1> SMPTECTRL GUI

	Will popup the GUI interface of the program.

	1> SMPTECTRL GUI SetSource "Internal"

	Will popup the GUI and use the "Internal" SMPTE sink source.

From WB you just double click its icon an it will pop up its GUI and
use current SMPTE sink as source or the one specified in the tooltypes.
You can have several project icons to start SmpteCtrl from WB.


-- 
Disabled features in this demoversion:

	- Play trigger comand from CLI
	- Tooltypes reading
	- Saving and loading of timecode memory